MAKER SUPER TAURO SYNTH 220

Gama Maker MAKER SUPER TAURO SYNTH 220
Maker
Fully Synthetic
High-performance lubricant fluids. Formulated with specially selected synthetic bases (PAO, esters) and latest-generation additives, specially suitable for applications under very severe working conditions: high loads, low speeds and high/low temperatures. They are specially suitable for industrial bearings and gears subject to very severe working conditions (high loads and low speeds) and within a wide range of temperatures. These include systems based on the forced circulation of oil, oil bath or splash lubrication. They are specially suitable for working at high temperatures, as their excellent resistance to oxidation allows extension of time between replacements, saving oil change, equipment cleaning and shutdown costs.
    Technical Information

    Quality levels, approvals and recommendations

    • AGMA: 9005-F16 (100, 150, 220, 320, 460)
    • AIST: 224 (US Steel 224) (100, 150, 220, 320, 460)
    • Aprobado por FLENDER Gear Units Rev.16* (150, 220, 320, 460)
    • DANIELI: STANDARD N. 0.000.001 - REV.15* (150, 220, 320, 460)
    • DIN: 51517/3 - CLP (100, 150, 220, 320, 460)
    • Fives Cincinnati: P-35 (460)
    • Fives Cincinnati: P-69 (320)
    • Fives Cincinnati: P-74 (220)
    • Fives Cincinnati: P-76 (100)
    • Fives Cincinnati: P-77 (150)
    • ISO: CKT (100, 150, 220, 320, 460)
    • REINTJES: BV1597/2, BV1917/2* (100)
    • REINTJES: BV1597/4, BV1917/4* (150)
    • THYSSENKRUPP (CLP PAO)* (150, 220, 320, 460)
    • ZANINI RENK* (100)
    *Formal approval
    (*) Formal approval

    Qualities

    Exceptional resistance to oxidation at high temperatures.
    Very low pour point, allowing operation at low temperatures.
    Very high viscosity index, allowing lubrication within a wide range of temperatures.
    Lower friction coefficient than conventional oils, thereby reducing power consumption.
    Compatible with conventional elastomers, joints and paints.
    Miscible with mineral oils.
    Excellent water separation and anti foam properties.
    Very good anti rust and anti corrosion protection.
    Optimum EP properties.
    MOAHs free (Mineral Oil Aromatic Hydrocarbon).

    Related products

    MAKER SUPER TAURO SYNTH HQ 220
    MAKER SUPER TAURO PAG 220
    MAKER SYSTEM EP 220
    These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss. These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss.
    MAKER SYSTEM 220
    These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication. These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication.