MAKER SUPER TAURO PAG 680

Gama Maker MAKER SUPER TAURO PAG 680
Maker
Fully Synthetic
High performance synthetic lubricants with polyglycol base stocks. Contain latest generation additives, which make them ideal for severe applications at a wide range of temperatures. Developed with water soluble stocks which ensure excellent EP and micropitting characteristics. Their excellent resistance to oxidation enables oil change periods to be extended thus reducing costs. Specially formulated for use in bearings, rollers and a wide variety of industrial, helicoidal, conical, planetary and worm gear units. As a precaution, they cannot be mixed with mineral oils. It is necessary to clean the installation whenever there is a change from mineral oil to Maker Super Tauro PAG.
    Technical Information

    Quality levels, approvals and recommendations

    • DAVID BROWN: G
    • DIN 51517-CLP (except emulsion)
    • FLENDER: Rev. 15
    • ISO: 6743/6 CKT
    (*) Formal approval

    Qualities

    ⦁ Exceptional resistance to oxidation at high temperatures
    ⦁ Low pour point, which enables working at low temperatures
    ⦁ Very high viscosity index
    ⦁ Compatible with the majority of joints and gaskets
    ⦁ Free of chlorine and sulphur and lead based compounds
    ⦁ Minimal formation of deposits
    ⦁ Optimal EP and micropitting properties
    ⦁ Exceptional friction rate, which makes it especially recommendable for worm gear reductants

    Related products

    MAKER SYSTEM 680
    These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication. These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication.