Lubricants
Country
Spain France Italy Vietnam Thailand Timor Leste Singapore Mongolia Maldives Malaysia Laos Japan Philippines South Korea North Korea China Cambodia Nepal Bhutan Brunei Burma Slovenia Slovakia Serbia Romania Poland Montenegro Moldova North Macedonia Kosovo Czech Republic Croatia Bulgaria Bosnia-Herzegovina Austria Albania Peru Mexico Indonesia Hungary Greece Brazil Turkmenistan Tajikistan Kyrgyzstan Kazakhstan Azerbaijan Yemen Marshall Islands Sri Lanka Syria Qatar Pakistan Oman Lebanon Kuwait Jordan Israel Iran Iraq United Arab Emirates Myanmar Bangladesh Bahrain Saudi Arabia Afghanistan Venezuela Uruguay Suriname Paraguay Guyana Ecuador Chile Colombia Bolivia Argentina St. Kitts and Nevis Saint Lucia Trinidad and Tobago Dominican Republic Saint Vincent and the Grenadines Panama Nicaragua Jamaica Honduras Haiti Guatemala Granada El Salvador Dominica Cuba Costa Rica Belize Barbados Bahamas Antigua and Barbuda United States Canada South Sudan Eritrea Zimbabwe Zambia Democratic Republic of the Congo Uganda Togo Chad Tanzania Swaziland Sudan Somalia Sierra Leone Seychelles Senegal Sao Tome and Principe Rwanda South Africa Central African Republic Nigeria Niger Namibia Mozambique Mauritania Mauritius Morocco Mali Madagascar Libya Liberia Lesotho Kenya Equatorial Guinea Guinea-Bissau Guinea Ghana Gambia Gabon Ethiopia Egypt Djibouti Côte d'Ivoire Congo Comoros Cameroon Capo Verde Burundi Botswana benin Algeria Angola Burkina Faso Turkey Armenia Georgia Ukraine Switzerland Vatican San Marino United Kingdom Andorra Norway Monaco Liechtenstein Iceland Slovak Republic Lithuania Estonia Latvia Sweden Germany Portugal Netherlands Malta Luxemburgo Ireland Finland Denmark Cyprus Belgium Papua New Guinea Uzbekistán New Zealand Palestine Australia Fiji Tonga Samoa Tuvalu Federated States of Micronesia Vanuatu Solomon Islands Palau Kiribati Cook Islands Nauru Gibraltar
Languages
Español English Français Italiano Português

MAKER SUPER TAURO 1000

Gama Maker MAKER SUPER TAURO 1000
Maker
Mineral
The Maker Super Tauro range of oils has been developed for applications in industrial gear assemblies with high load requirements. Its careful formulation incorporates the highest quality bases and additives, improving its anti-rust properties, its anti-foaming capacity and its resistance to oxidation. As such, these oils offer an excellent performance that puts them ahead of their competition.
They are particularly suitable for all kinds of industrial reducers and multipliers, using splash or circulating lubrication.
Very effective in all cases requiring maximum levels of oxidation resistance and/or load capacity.

    Locate your distributor

    Technical Information

    Technical data sheet

    Safety data sheet

    Quality levels, approvals and recommendations

    AGMA: 9005-F16 (antigua 9005-E02-EP), AIST: 224 (US Steel 224), DAVID BROWN: S1.53.101, DIN: 51517/3 - CLP, FIVES CINCINNATI: P-78, ISO: 12925-1 CKD

    Qualities

    ⦁ Reduce wear under boundary lubrication conditions and extreme pressure
    ⦁ Excellent thermal stability
    ⦁ Very good protection against rust, preventing steel corrosion
    ⦁ High de-emulsifying capacity (quick separation from water)
    ⦁ Good antifoaming characteristics
    ⦁ Resistance to the rupture of the lubricant film

    Related products

    MAKER SYSTEM EP 220
    MAKER SYSTEM EP 220

    MAKER SYSTEM EP 220


    RP_6186M/
    These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss. These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss.
    Download Technical Data Sheet
    More information
    MAKER SYSTEM 220
    MAKER SYSTEM 220

    MAKER SYSTEM 220


    RP_6185M/
    These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication. These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication.
    Download Technical Data Sheet
    More information