MAKER SYSTEM 390
Maker
Mineral
These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings.
These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills.
Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity.
They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication.
These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills.
Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity.
They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication.
Technical Information
Quality levels, approvals and recommendations
Qualities
⦁ High viscosity index.
⦁ Low pour point.
⦁ High stability.
⦁ Low level of soot.
⦁ Excellent water separation.
⦁ Excellent anti-rust properties.