MAKER SYSTEM EP 460

Gama Maker MAKER SYSTEM EP 460
Maker
Mineral
These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss.
    Technical Information

    Quality levels, approvals and recommendations

    MORGOIL®: MORGOIL® Lubricant Specification;
    ISO: 6743/2 – FC
    DIN: 51517/3 - CLP
    SMS Group: SN 180-3

    Qualities

    High viscosity index.
    Low pour point.
    Low level of soot.
    Excellent water separation.
    Excellent anti-rust properties.
    Marked extreme pressure properties.

    Related products

    MAKER HELEN 460
    MAKER SUPER TAURO SYNTH 460
    MAKER SYSTEM 460
    These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication. These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication.