MAKER SUPER TAURO PAG 220

Gama Maker MAKER SUPER TAURO PAG 220
Maker
Fully Synthetic
High-performance lubricants, 100% synthetic (polyglycols). They have latest-generation additives which make them specially suitable for applications under severe conditions within a wide temperature range: from -30 to over 200 ºC. They are specially developed to provide extra protection against corrosion and water separation. Maker Super Tauro PAG oils have superior performance characteristics to conventional gear oils and are suitable for systems requiring high levels of resistance to oxidation and load capacity.
    Technical Information

    Quality levels, approvals and recommendations

    • AGMA: 9005-F16 (220, 320)
    • AIST: 224 (US Steel 224) (220, 320)
    • DANIELI: STANDARD N. 0.000.001 - REV.15* (220, 320)
    • DIN: 51517/3 - CLP (220, 320)
    • ISO: 6743/6 CKT (220, 320)
    • NEGRI BOSSI: ELEOS, eCANBIO JANUS Y VESTA series* (220)
    *Formal approval

    Qualities

    ⦁ Exceptional resistance to oxidation at high temperatures
    ⦁ Low pour point, allowing operation at low temperatures
    ⦁ Very high viscosity index, allowing lubrication within a wide range of temperatures
    ⦁ Exceptional friction coefficient, which makes them specially recommendable for worm drive dividers
    ⦁ Free of chlorine and sulphur or lead-based compounds
    ⦁ Minimum formation of deposits
    ⦁ Excellent water separation and anti-foam properties
    ⦁ Very good anti-rust and anti-corrosion protection
    ⦁ Optimum EP properties
    ⦁ Compatible with most joints and retainers

    Related products

    MAKER SUPER TAURO SYNTH HQ 220
    MAKER SUPER TAURO SYNTH 220
    MAKER SYSTEM EP 220
    These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss. These oils are obtained from carefully selected paraffinic bases to which specific additives are added to endow them with marked extreme pressure and anti-wear properties. Therefore, in addition to having a high viscosity index, these oils are highly resistant to oxidation and have excellent demulsifying capacity, easily attaining load step 10 in the FZG test. These oils are typically used to lubricate bearings by circulation subject to very severe service conditions, including water contamination, normally used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads, only medium loads. These oils, despite their EP additives, remain innocuous in the presence of metals, for which they can be used to lubricate large-diameter slow-speed plain bearings by means of drip feed, oil bath or oil ring lubrication. In their lowest level of viscosity, these oils are also used to lubricate medium-speed ball or roller bearingss.
    MAKER SYSTEM 220
    These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication. These oils are formulated from carefully selected and specially treated paraffinic bases, endowing the end products with a high viscosity index, good resistance to oxidation and excellent demulsifying capacity. They are formulated with the grades of viscosity used traditionally to lubricate rolling mill bearings. These oils are typically used to lubricate, by means of circulation lubrication, bearings subject to very severe service conditions used in rolling mills. Their characteristics also make them suitable for lubricating industrial dividers not subject to shock loads or heavy loads, and for the casings of compressors requiring these viscosity levels and but not requiring oils with anti-wear capacity. They are also suitable for the lubrication of many low-speed large-diameter plain bearings by means of drip feed, oil bath or oil ring lubrication.