Lubricants
Country
Spain France Italy Vietnam Thailand Timor Leste Singapore Mongolia Maldives Malaysia Laos Japan Philippines South Korea North Korea China Cambodia Nepal Bhutan Brunei Burma Slovenia Slovakia Serbia Romania Poland Montenegro Moldova North Macedonia Kosovo Czech Republic Croatia Bulgaria Bosnia-Herzegovina Austria Albania Peru Mexico Indonesia Hungary Greece Brazil Turkmenistan Tajikistan Kyrgyzstan Kazakhstan Azerbaijan Yemen Marshall Islands Sri Lanka Syria Qatar Pakistan Oman Lebanon Kuwait Jordan Israel Iran Iraq United Arab Emirates Myanmar Bangladesh Bahrain Saudi Arabia Afghanistan Venezuela Uruguay Suriname Paraguay Guyana Ecuador Chile Colombia Bolivia Argentina St. Kitts and Nevis Saint Lucia Trinidad and Tobago Dominican Republic Saint Vincent and the Grenadines Panama Nicaragua Jamaica Honduras Haiti Guatemala Granada El Salvador Dominica Cuba Costa Rica Belize Barbados Bahamas Antigua and Barbuda United States Canada South Sudan Eritrea Zimbabwe Zambia Democratic Republic of the Congo Uganda Togo Chad Tanzania Swaziland Sudan Somalia Sierra Leone Seychelles Senegal Sao Tome and Principe Rwanda South Africa Central African Republic Nigeria Niger Namibia Mozambique Mauritania Mauritius Morocco Mali Madagascar Libya Liberia Lesotho Kenya Equatorial Guinea Guinea-Bissau Guinea Ghana Gambia Gabon Ethiopia Egypt Djibouti Côte d'Ivoire Congo Comoros Cameroon Capo Verde Burundi Botswana benin Algeria Angola Burkina Faso Turkey Armenia Georgia Ukraine Switzerland Vatican San Marino United Kingdom Andorra Norway Monaco Liechtenstein Iceland Slovak Republic Lithuania Estonia Latvia Sweden Germany Portugal Netherlands Malta Luxemburgo Ireland Finland Denmark Cyprus Belgium Papua New Guinea Uzbekistán New Zealand Palestine Australia Fiji Tonga Samoa Tuvalu Federated States of Micronesia Vanuatu Solomon Islands Palau Kiribati Cook Islands Nauru Gibraltar
Languages
Español English Français Italiano Português

MAKER IBERTEM 34

Gama Maker MAKER IBERTEM 34
Maker
Mineral
A natural paraffin mineral oil with low viscosity, formulated with highly refined base oils and specially selected additives, which provide the properties required to overcome the difficult conditions needed for hot, rapid steel hardening; where the bath temperature is between 85 and 125 ºC, and in an enclosed atmosphere above 95 ºC. This kind of oil is used with non-alloy or low alloy parts.

    Locate your distributor
    Technical Information

    Technical data sheet

    Safety data sheet

    Quality levels, approvals and recommendations

    Qualities

    High cooling speed. Contains additives to achieve good resistance to oxidation and sludge formation, thus prolonging its useful life. Very good thermal stability and low volatility, which reduces smoke and the risk of fire. Good foam resistance. Uniform and lasting hardening capacity.

    Related products

    MAKER IBERTEM 34
    MAKER IBERTEM 34

    MAKER IBERTEM 34


    RP_7022Z/
    A natural paraffin mineral oil with low viscosity, formulated with highly refined base oils and specially selected additives, which provide the properties required to overcome the difficult conditions needed for hot, rapid steel hardening; where the bath temperature is between 85 and 125 ºC, and in an enclosed atmosphere above 95 ºC. This kind of oil is used with non-alloy or low alloy parts. A natural paraffin mineral oil with low viscosity, formulated with highly refined base oils and specially selected additives, which provide the properties required to overcome the difficult conditions needed for hot, rapid steel hardening; where the bath temperature is between 85 and 125 ºC, and in an enclosed atmosphere above 95 ºC. This kind of oil is used with non-alloy or low alloy parts.
    Download Technical Data Sheet
    More information
    MAKER IBERTEM 24
    MAKER IBERTEM 24

    MAKER IBERTEM 24


    RP_7021Z/
    Natural paraffin mineral oil with low viscosity, formulated with highly refined based oils and selected additives that increase the hardening speed and provide the properties required to overcome the difficult conditions needed in cold, high-speed steel hardening (bath temperature is between 40 and 80 ºC). This kind of oil is formulated to achieve non-alloy steel parts with maximum hardness and minimum deformations and breaks. Natural paraffin mineral oil with low viscosity, formulated with highly refined based oils and selected additives that increase the hardening speed and provide the properties required to overcome the difficult conditions needed in cold, high-speed steel hardening (bath temperature is between 40 and 80 ºC). This kind of oil is formulated to achieve non-alloy steel parts with maximum hardness and minimum deformations and breaks.
    Download Technical Data Sheet
    More information
    MAKER IBERTEM 15 R
    MAKER IBERTEM 15 R

    MAKER IBERTEM 15 R


    RP_7020Z/
    A natural paraffin mineral oil with low viscosity, formulated with highly refined base oils, which provide the properties required to overcome the difficult conditions needed for the normal hardening of steel when high-speed hardening is not needed. This kind of oil is used with steel alloys and is formulated to last a long time. A natural paraffin mineral oil with low viscosity, formulated with highly refined base oils, which provide the properties required to overcome the difficult conditions needed for the normal hardening of steel when high-speed hardening is not needed. This kind of oil is used with steel alloys and is formulated to last a long time.
    Download Technical Data Sheet
    More information
    MAKER IBERTEM 15
    MAKER IBERTEM 15

    MAKER IBERTEM 15


    RP_7019Z/
    A natural paraffin mineral oil with low viscosity, formulated with refined base oils and specially selected additives, which provide the properties required to overcome the difficult conditions needed for the normal hot dip coating of steel. It is particularly suitable for normal, cold hardening work, where the bath temperature is between 40 and 80ºC. This kind of oil is used with steel alloys and is formulated to last a long time. A natural paraffin mineral oil with low viscosity, formulated with refined base oils and specially selected additives, which provide the properties required to overcome the difficult conditions needed for the normal hot dip coating of steel. It is particularly suitable for normal, cold hardening work, where the bath temperature is between 40 and 80ºC. This kind of oil is used with steel alloys and is formulated to last a long time.
    Download Technical Data Sheet
    More information