MAKER ICE OIL S 68

Gama Maker MAKER ICE OIL S 68
Maker
Fully Synthetic
Synthetic POE base oil for compressors, for use in very low temperature applications, such as refrigeration, air conditioning and industrial refrigeration, wherever compressors use mainly HFC type cooling gases, which are environmentally friendly and are replacing the old HCFC’s. Its special formulation enhances its excellent lubricating performance, thermal stability and anti-corrosion protection. They are used, in order of increasing viscosity, for saturated steam, re-heated steam and steam with a high degree of re-heating. Valid for general greasing, low loaded gears and other mechanical elements where high temperature conditions may occur. They can be used as heat transfer fluids in the case of open-air thermal circuits.
    Technical Information

    Quality levels, approvals and recommendations

    DIN: 51503 KD, ISO: 6743 -3B DRD, BITZER: BITZER (de tornillo), DORIN: DORIN (de pistón), FRASCOLD: FRASCOLD (de pistón), BLISSFIELD: BLISSFIELD (de pistón)

    Qualities

    Completely mixable with HFC gases, such as R134a. Low pour point. High viscosity index. High chemical and thermal stability. Wax free. Low flocculation point.

    Related products

    MAKER SYNTHETIC THOR 100
    MAKER ARIES 220
    Range of oils of the so-called turbine type, both due to their manufacturing process and because, in fact, some of the oils are specifically formulated for said application. They are obtained from selected paraffinic bases to which oxidation, rust and anti-foam inhibitor additives are added to endow them with excellent properties and magnificent performance in service. The lowest viscosity oils (ISO grades 7, 15 and 22) are generally used in high precision or highly revolutionary mechanisms. ISO grades between 32 and 100 (inclusive) are normally used in turbines, mainly steam or hydraulic, but they are also highly suitable for compressors, hydraulic systems, etc. The higher viscosity oils (types 125, 150, 220 and 380) are suitable for the lubrication of various types of mechanical equipment, in casing or by circulation. Range of oils of the so-called turbine type, both due to their manufacturing process and because, in fact, some of the oils are specifically formulated for said application. They are obtained from selected paraffinic bases to which oxidation, rust and anti-foam inhibitor additives are added to endow them with excellent properties and magnificent performance in service. The lowest viscosity oils (ISO grades 7, 15 and 22) are generally used in high precision or highly revolutionary mechanisms. ISO grades between 32 and 100 (inclusive) are normally used in turbines, mainly steam or hydraulic, but they are also highly suitable for compressors, hydraulic systems, etc. The higher viscosity oils (types 125, 150, 220 and 380) are suitable for the lubrication of various types of mechanical equipment, in casing or by circulation.