MAKER IBERCUT 20 A

Gama Maker MAKER IBERCUT 20 A
Maker
Mineral
Neat cutting oil, very fluid, formulated with highly refined paraffin base stocks. Extreme pressure oil package specially developed for cutting oil and machining operations with hardened steels. It is not suitable for soft or yellow metals. It also has good lubricity and film resistance, which are necessary in medium or high-difficulty operations in order to prevent shavings from welding and tool seize-ups. The Ibercut 20 A is particularly appropriate for jobs such as threading, bolting, and broaching of medium and high-density stainless steel. It is also suitable for gear cutting, milling, and medium and high-difficulty mechanical operations.
    Technical Information

    Quality levels, approvals and recommendations

    ISO: 6743/7-L-MHE

    Qualities

    Recommended for work with hardened steels.
    To prevent smoke, aim an abundant stream at the work area.
    Flash point that allows for its use without risks.

    Related products

    MAKER IBERCUT EDM
    MAKER IBERCUT EDM
    MAKER IBERCUT 9 AM
    MAKER IBERCUT 30 A
    MAKER IBERCUT 20 C
    MAKER IBERCUT 20 A PLUS

    Pure cutting lubricating oil with high fluidity, formulated from Group III hydrocracked synthetic bases that provide high thermal stability, lower volatility and greater resistance to oxidation compared to mineral oils used for the same application. Extreme pressure additive package specially developed for severe operations of cutting and machining of hard steels. It also has a good lubricity and film resistance, required in operations of high difficulty. It avoids phenomena of welding of chips and seizure of the tools, and maintaining at the same time a great cooling capacity. MAKER IBERCUT 20 A PLUS is especially suitable for operations such as tapping, threading or broaching of stainless steel of high hardness. Also, for gear cutting, milling and operations of high mechanical difficulty.

    Pure cutting lubricating oil with high fluidity, formulated from Group III hydrocracked synthetic bases that provide high thermal stability, lower volatility and greater resistance to oxidation compared to mineral oils used for the same application. Extreme pressure additive package specially developed for severe operations of cutting and machining of hard steels. It also has a good lubricity and film resistance, required in operations of high difficulty. It avoids phenomena of welding of chips and seizure of the tools, and maintaining at the same time a great cooling capacity. MAKER IBERCUT 20 A PLUS is especially suitable for operations such as tapping, threading or broaching of stainless steel of high hardness. Also, for gear cutting, milling and operations of high mechanical difficulty.

    MAKER IBERCUT 12 AM
    MAKER IBERCUT 10 AM EP